|
The dry instillation of
Hydronic and electric radiant heating systems.
A "dry" installation involves
installing the hydronic and electric radiant heating systems under the
sub floor between the joists or over the sub floor between two layers of
plywood. A 2-inch (50-mm) minimum air gap is required. Reflective
insulation should be installed under the heating product to direct the
heat upward.
Self-regulating elements can be sandwiched between the insulation and
the floor covering. Definitely avoid air gaps. Where reflective foil is
used, place the aluminum side away from the heating elements
This website and the materials contained herein are provided on an 'as
is' basis. E Radiant Heat.com, make no representations or warranties,
either expressed or implied, of any kind with respect to this website or
its contents. E Radiant Heat.com, disclaim all warranties, expressed or
implied, including but not limited to fitness for a particular purpose.
E Radiant Heat.com, will not be liable for any damages of any kind
arising from the use of this site, including but not limited to direct,
indirect, incidental, punitive, and consequential damages. We reserve
the right to modify our site and these disclaimers, terms and conditions
at any time and without notice
Articles
| Resource page |
